xable.net

Darren

(aka xable)

Re: Finnish Update Pack SP3 - Suomi Päivitys Paketti SP3 - v2.0.18

Well,

The message you sent was you wanting me to deleting all the replys in this thread, which I refused.

As for the file you talk of, XHelper.exe, is a custom autoit script that I made to clean up a few unneeded files post install. It has no effect on the proper installation and usage of my pack. The issue with it that you refer to is that it stopped working on non-english installs. Re-compiling it fixed that, as is the nature of autoit you do need to re-compile the scripts from time to time.

It's not about pleasing me simexi, it's about being clear, open and honest. That way nothing can be misconstrued.

simexi

Member

Re: Finnish Update Pack SP3 - Suomi Päivitys Paketti SP3 - v2.0.18

By pleasing I just meant about that explanation about XHelper.exe-file... In short, was it clear enough?

And it is okay if you don't want to cleanup this thread, I'll just stop replying about updates. I reply if there's something important to say about the release.

Darren

(aka xable)

Re: Finnish Update Pack SP3 - Suomi Päivitys Paketti SP3 - v2.0.18

By pleasing I just meant about that explanation about XHelper.exe-file... In short, was it clear enough?

Ok. It did come accross sarcastic but no problem.

And it is okay if you don't want to cleanup this thread, I'll just stop replying about updates. I reply if there's something important to say about the release.

You didn't ask me to delete just the posts where all you say is "Updated". You said and I quote:

"could u delete posts from "my" thread?"
"#2 -> latest"
"Thread has grown too big, I think."

That's all posts including ones from other people, I'm not prepared to do that. I could delete just the posts that just say Updated, but they are not in english so I would need to first translate them and that would take a while, is it really worth it. Especially as you can just make a new thread as I suggested in email if you feel it has got too long.

It's up to you when you want to reply to your thread, but keep in mind that anyone subscribed to it will get email notification of new replys and they maybe using those notifications to be alerted of new updates. That's why I always reply to my thread when I release an update, it acts a notification service aswell as a support thread.

simexi

Member

Re: Finnish Update Pack SP3 - Suomi Päivitys Paketti SP3 - v2.0.18

Okay. I can translate it for you.

All "Päivitetty." means just "Updated."
---

https://xable.net/forums/viewtopic.php?pid=1106#p1106
Olet tehnyt hyvää työtä,aikaisemmin integroin KB:t yksittäisinä fileinä nlitellä suomi versiooni.Oletko ajatellu integroida pakettiin myös Windows installerin 4.5(KB942288-v2-x86)?
You've done execelent work. Earlier I've integrated KBs one by one with Nlite to Finnish version. Have you thought about to integrate KB942288-v2-x86?

My reply:
Noudatan nyt tuota Xablen viitoittamaa tietä. Ehkä joku päivä.
I follow Xable. Maybe someday...
---

https://xable.net/forums/viewtopic.php?pid=1241#p1241
At this point I guess I found out the bug in XHelper.exe.
Not actual translation, but you know the rest.
---

https://xable.net/forums/viewtopic.php?pid=1453#p1453
Ongelma viimeisimmän päivityspaketin (v2.0.4)kanssa,Booggy slipstreamerillä sliptriimattu Media Player 11 ei asennu eli kun järjestelmän asennuksen jälkeen avaa sen,tulee ilmoitus että media playeriä ei asennettu oikein ja kehottaa asentamaan uudelleen.Ilman nykyistä päivityspakettiä sekä vanhemmalla (v2.0.2) kaikki sujuu täysin ongelmitta.

Probs with v2.0.4, slipstreamed WMP11 with Booggy won't work. After installation system notifies that WMP is not installed correctly and suggest to install it again. Without current update pack and with older packs it worked fine.

My reply:
https://xable.net/forums/viewtopic.php?pid=1455#p1455
hmmh... paketti pitäisi mennä normaalisti nlitellä. siis pelkkä päivitys sisään, ei muuta ylimääräistä. en tiedä tuosta media playerin slippauksesta sitten...

tsekkaas tää: (kohta 2)
https://xable.net/forums/viewtopic.php?pid=974#p974

The package should work with Nlite. I mean, only the package, nothing else. I don't know anything about that WMP11 slipstreaming...
Check this: (#2)
https://xable.net/forums/viewtopic.php?pid=974#p974
---

https://xable.net/forums/viewtopic.php?pid=1454#p1454
Listaan kaikki havaitsemani"outoudet"
1.nLiten integroidessa päivityspakettia näyttöruutu menee täysin mustaksi n.5-10 sek. ajaksi
2.Yrittämästäni 9 asennuskerrasta 6 kertaa näyttö on mennyt musta-valko kirjavaksi asennuksen lopussa,johon ei auta muu kuin uudelleen boottaus
3.Media Player 11 ei asennu,mutta muut addonit näyttävät asentuneen oikein
Ilman päivityspaketin lisäämistä asennukseen,kaikki toimii kuten pitää,ei tule siis edellisen kaltaisia virheitä

I list all "probs" I've found:
1. nLite goes black while integrating for about 5-10 seconds
2. From 6/9 installations, my screen has gone black and white in the end of installation, nothing helps, only rebooting
3. I cannot install WMP11, other addons installs fine
Without update pack, everything works fine. No errors I've just mentioned.

My reply:
https://xable.net/forums/viewtopic.php?pid=1456#p1456
    1.nLiten integroidessa päivityspakettia näyttöruutu menee täysin mustaksi n.5-10 sek. ajaksi
    1. nLite goes black while integrating for about 5-10 seconds

tuo kuulostaa oudolta. ettei vika olisi käyttiksessäsi? nlitessä jotain vikaa, uudelleen asennus?
That sound odd. Probs with OS? Reinstall Nlite?

https://xable.net/forums/viewtopic.php?pid=1457#p1457
eli eli.. ittel meni ihan hyvin sisään wmp11

normaalisti nlitellä toi päivityspaketti, sit slippasin wmp11 + updatet
KB929399,KB939683,KB941569,KB952069,KB954154,KB954155,KB973540,KB975558,KB978695,KB2378111

eli noi mukaan tohon wmp11 slippaukseen. sit pitäs toimia.

So, I just successfully integrated WMP11.
Used Nlite, and then slipstreamed WMP11 + updates.
KB929399,KB939683,KB941569,KB952069,KB954154,KB954155,KB973540,KB975558,KB978695,KB2378111
Include those while slipstreaming WMP11, then it should work.

Other user reply for that:
https://xable.net/forums/viewtopic.php?pid=1489#p1489
Moi,

Nyt homma onnistu kun tein nlite hässäkän ensin ja sit slippasin wmp11,olen aina ennen tehnyt toisinpäin,outo juttu...kiitti vinkistä

Hi, it worked now when I did nlite first and slipstreamed WMP11. I've always done it other way around, strange. Thank for the tip.

And my reply:
https://xable.net/forums/viewtopic.php?pid=1490#p1490
joo. se on vaan just ku nois päivityksis on vanhempiin wmp versioihin noi päivitykset.. siks joutuu samat uudestaan. ehkä joku päivä Xable tekee v3 ja siin o IE8 + WMP11, ittel ei hirveesti o kiinnostusta väsätä moista. helpompi on ottaa mallia itse "mestarilta" ja noudattaa hänen versiointiaan

The packages have updates to older WMP versions. That is way you have to use same updates. Maybe someday Xable does v3 and it has IE8+WMP11, I've now intrest to do that. It is easier to follow the "master" and use his versions
---

I think I've just translated all..  I skipped my own comments. So now it's up to you if u want to delete posts..